Replacement for CANON PowerShot SD1000 Camera Battery Pack
(Including Free Taxes & VAT)
- Item No.
- EDCN009L
- Chemistry
- LI-ION
- Voltage
- 3.7V
- Capacity
- 730mAh
- Dimension
- 40.40 x 35.40 x 5.90 mm
- Color
- Light Gray
The CANON PowerShot SD1000 is a replacement LI-ION rechargeable battery pack for CANON digital cameras such as the PowerShot SD1000. It has a power rating of 3.7V, 730mAh. It has a battery life of approximately 300-500 times (2-5 years) with no memory effect.
CANON PowerShot SD1000 Compatible With Battery Code:
CANON PowerShot SD1000 Fit Models:
- CANON Digital 40
- Digital 50
- Digital 50/40
- DIGITAL IXUS 30
- DIGITAL IXUS 40
- DIGITAL IXUS 50
- Digital IXUS 55
- Digital IXUS 55 (EU)
- Digital IXUS 60
- Digital IXUS 65
- Digital IXUS 70
- Digital IXUS 75
- DIGITAL IXUS 80 IS
- Digital IXUS i zoom
- Digital IXUS i zoom (EU)
- Digital IXUS i7 zoom
- Digital IXUS WIRELESS
- Digital IXUS WIRELESS (UK)
- IXUS 55
- IXUS I ZOOM
- IXY Digital 10
- IXY Digital 40
- IXY Digital 50
- IXY Digital 55
- IXY Digital 60
- IXY Digital 60 (JP)
- IXY Digital 70
- IXY Digital 80
- IXY Digital 90
- IXY Digital L3 Series
- IXY Digital L4
- IXY DIGITAL WIRELESS
- IXY Digital WIRELESS (JP)
- PowerShot SD1000
- PowerShot SD1100 IS
- POWERSHOT SD200
- POWERSHOT SD30
- PowerShot SD30 (US)
- POWERSHOT SD300
- PowerShot SD40
- POWERSHOT SD400
- PowerShot SD430 WIRELESS
- PowerShot SD430 WIRELESS (US)
- POWERSHOT SD450
- PowerShot SD450 (US)
- PowerShot SD600
- PowerShot SD630
- PowerShot SD750
- PowerShot TX1
The CANON PowerShot SD1000 digital cameras is the key to a key, . probably second in importance only lens, and want to photograph in Convenience, a powerful battery to provide power as a follow-up is essential. But even the best CANON PowerShot SD1000 battery time, if not be properly carry out care and maintenance, will not be long before lost a strong momentum, so battery maintenance is very important.
Battery Maintenance
1.For a (section) digital camera battery, the use of the length of time, not only with the quality, power on, in fact, with the user's operation also has great relevance. Most photographers are accustomed, after each time the camera runs out of place inside the camera bags, or placed inside cabinets, batteries are not out to save individually, this approach sounds like there is no problem, but not conducive to battery protection.
2.Generally speaking, if more than 15 days do not use the camera, then best to remove the CANON PowerShot SD1000 battery from the CANON PowerShot SD1000 camera inside a separate storage, preservation of the environment is best dry and shady place, and do not store the battery for PowerShot SD1000 together with metal objects.
3.According to our survey, is currently in the market you can buy the majority of CANON PowerShot SD1000 digital cameras use lithium batteries, it is relatively easy storage. The only caveat is that the long-term is not used, preferably at intervals of 2 months, once to activate the battery, that is, charge and discharge time, this can effectively extend CANON PowerShot SD1000 battery life.
4. As for the Ni-MH AA battery, the most annoying is the memory effect, this effect will reduce the total capacity of the CANON PowerShot SD1000 battery and the use of time, and as time goes on, less and less stored charge, the PowerShot SD1000 battery also will consume the more to faster. Therefore, we should try to be all used up rechargeable power, each charge must be sufficient to power the most full.
If you go out when the temporary use of alkaline batteries, we must remember that in time out, or else a long time if not used, the CANON PowerShot SD1000 battery is easy to leak corrosive liquid , the camera could not escape the destiny scrapped.
5.For the use of alkaline batteries of the user, as already mentioned, bear in mind is that he finished in the use of CANON digital cameras, will surely remember that removing CANON PowerShot SD1000 batteries to avoid battery fluid flow phenomena causing damage to their dear CANON cameras.
6.As for the use of rechargeable nickel-metal hydride batteries and lithium batteries users. The CANON PowerShot SD1000 battery charge is very particular about, and the bought back PowerShot SD1000 battery power is low or no power in general, the first charge must be adequate.Battery charging and exhausted tend to be more heat, it is best to be cooled and then loaded CANON PowerShot SD1000 camera battery. Lithium battery charging time are generally more than 8 hours, while the Ni-MH battery charging time are generally more than 16 hours. To achieve the best results, that is, the CANON PowerShot SD1000 battery reached its maximum power, there are generally three or more times repeated charge-discharge can. Batteries in use three times, the best place to find the opportunity to make a further charge fully recharge, so as not there is residual power in the battery when the repeated charge, or will shorten battery life.
7.However, note that the lithium batteries because there is no memory effect, so do not discharge, otherwise it will destroy the battery structure, and make loss of battery life.
In addition, in order to avoid the loss of electricity, especially nickel-metal hydride battery user, remove the battery charger after the power end . Do not let the CANON PowerShot SD1000 battery poles in contact with conductors at the same time, for example, do not use your fingers at the same time at both ends of the CANON PowerShot SD1000 battery contacts. The use of lithium batteries users should try to keep the camera battery box battery positive and negative contact points clean, if necessary, you can use a dry cloth gently wipe the swab and then into the battery.
8.Also need to note that, even if the user is to use lithium batteries in the long run does not use a digital camera, it can be completely discharged, remove the CANON PowerShot SD1000 battery, stored in a dry, cool environment. Other point that should be noted is, whether you are the use of nickel-metal hydride batteries or Li-ion batteries or not, you'd better not have a good electrical charge the battery on the bag, pocket, bag or container with metal objects in order to prevent short-circuit .






